Camfil AP13 405414006 - 20x25x4 MERV 13

AP13 20x25x4 MERV 13 Furnace Filter (Actual Size: 19-3/8" x 24-3/8" x 3-3/4")

The Camfil AP-Thirteen (AP13) 20x25x4 extended surface pleated furnace filter offers filtration for applications that have 2" or 4" deep filter tracks. The AP-Thirteen is a MERV 13 filter when evaluated per ASHRAE Standard 52.2 and meets the requirements for minimum filtration efficiency, as published in LEED manuals for new or existing buildings. The AP-Thirteen may reduce the size of the HVAC system, saving valuable mechanical area floor space. It also simplifies the upgrading of in-place systems, allowing existing units to meet LEED requirements without major equipment modification.

Standard furnace filters remove nuisance dusts, lint and contaminants associated with staining, and are primarily designed to protect equipment and act as prefilters. As a stand-alone furnace filter, the AP-Thirteen will perform these tasks and removes sub-micron particles, defined as lung-damaging by cognizant authorities. The AP-Thirteen, according to filtration application design manuals, can be used as the only filter for special process areas, electrical shops, paint shops, average general offices and laboratories. Other applications include analytical laboratories, electronics shops, drafting areas, conference rooms, and above average general offices.

Built for today’s HVAC systems, the AP-Thirteen 20x25x4:

• Has 15 pleats per linear foot in a 2" nominal depth or 11 pleats per linear foot in a 4" nominal depth. The radial pleat design ensures full use of media area and a longer filter life.
• Includes a synthetic fiber blend with a unique media loft that provides high efficiency ASHRAE MERV 13 performance and high dust-holding capacity.
• Has a welded wire media grid backing, treated for corrosion resistance, preventing media oscillation or filter pack failure as filter pressure drop increases.
• Has a high wet-strength beverage board frame that creates a rigid and durable filter pack. The APThirteen will not bow or deflect and is guaranteed to 2.0" w.g.
• Furnace filters are available in 2" and 4" depths.

These combined features allow the Camfil AP13 20x25x4 to beat other MERV 13 pleated panels by a factor of 20% or more resulting in the lowest total cost of ownership (TCO).